Импульсный блок питания для компьютера DR-240-24 высокое качество Один Выход ПРИВЕЛО DC 240 Вт 24vdc 10a Din-рейку Питания Трансформатор импульсный источник питания

Notice:

Please make sure the input voltage, output voltage and current in item specs when placing orders. Or we\'ll arrange the one as the item specs says.

Model DR-240-24 DR-240-48

DC Voltage 24V 48V

Voltage Tolerance 1% 1%

Rated Current 10A 5A

Current Range 0-10A 0-5A

Rated Power 240W 240W

Ripple & Noise 80mVp-p 150mVp-p

DC Adjustment Range 24-48V 48-53V

Setup, Rise Time: 800ms,40ms/230VAC at full load800ms,40ms/115VACat full load

Hold Time : 24ms/230VAC24ms/115VAC at full load

Voltage Range 88~264VAC47~63 Hz; selected by switch 120~370VDC

AC Current 2.8A/115 V 1.4A/ 230V

Efficiency 84%(HDR-240-24); 85%(HDR-240-48)

Inrush Current Cold start 27A/115V 45A/230V

Leakage Current <3.5mA/240VAC

PROTECTION

Over Load 105%~150%

Protection type: Constant current limiting, recovers automatically after fault condition is removed

Over Voltage 30-36V( HDR-240-24);54-60V(HDR-240-48)

Protection type: Shut down o/p voltage, re-power on to recover

OVER TEMP. 100C5C(TSW1)

Protection type: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

Working Temp., Humidity -10C~+70C;20%~90 %RH

Storage Temp., Humidity -20C~+85C;10%~95 %RH

Vibration 10~500Hz,2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY

Withstand Voltage I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC

Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC

STANDARD

Safety Standard Design refer to UL508,UL60950-1,TUV EN60950-1

EMC Standard EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2(EN50082-2)

OTHERS

Weight 1.2Kg

Packing 12pcs/15.5Kg/1.2CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12twisted pair-wire terminated with a 0.1 & 47 parallel capacitor.

3 .Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

5 . Derating may be needed under low input voltages. Please check the derating curve for more details.

Product Size:

What about production process of switching power supply?

Maker Industrial and Trading Company started to run businiess since 2006, which is located in Wenzhou Yueqing - The world-famous city for low-voltage electric apparatus.We owns followed subsidiary corporations:

Yueqing Maker electric Co., Ltd. concentrates on Import and Export.

Yueqing MINGWEI Switching power supply FactoryMore than 20 years of production experience,focus on production and research and development of switch power supply.